Mr. Mr LiangWhat can I do for you?
Dongguan Liaobu Jingye Precision Machinery Factory
Products
Home > Products > FT-650Metal Slitting Machinery > FT-650Aluminum Strip Slitting Machine > Rugged and practical metal cutting equipment
PRODUCT CATEGORIES
Basic Info
Model No.: FT-650
The operation of the rewinding machine pay attention to the end face reference of the rewinding shaft or the expansion and contraction shaft to be consistent with the guide shaft of the feeding separator. The expansion and contraction of the expansion and contraction shaft should be in place. It is forbidden to press the button for a long time to push and pull the cylinder to prevent the seal from being damaged in advance. , The lifting separator shaft is manually raised and lowered, pay attention to the stroke can not go over the head, the air of the expansion and contraction shaft air brake should be guaranteed not to have too much water, so as not to damage the pneumatic electromagnetic cutting, the expansion and contraction shaft slider is filled with high-quality lubricating oil every year Once (including all moving parts), the gear oil should be replaced after 500 hours of initial use of the gearbox, and every 2000 hours thereafter. The gearbox is in the frame, visible after removing the steel plate, and the bearings of the optical shaft and the expansion and contraction shaft every two years Add high-quality grease with high temperature resistance and high pressure resistance, and you can add lubricating oil after removing the body sealing plate.
Product Categories : FT-650Metal Slitting Machinery > FT-650Aluminum Strip Slitting Machine
Hot Products
Related Products
Send Inquiry
Mr. Mr Liang
Tel:+86-0769-88903828
Fax:86-0769-88903903
Mobile Phone:+8613929239351
Email:jjwdd2005@163.com
Address:No. 9-11, Beiyonghe Second Street, Xialing, Liaobu Town, Dongguan City, Dongguan, Guangdong
