FT-650Aluminum Strip Slitting Machine

Rugged and practical metal cutting equipment

• Model No.: FT-650

The operation of the rewinding machine pay attention to the end face reference of the rewinding shaft or the expansion and contraction shaft to be consistent with the guide shaft of the feeding separator The expansion and contraction of the expansion and contraction shaft should be in place It is forbidden to press...

Rugged and practical metal slitting equipment

• Model No.: FT-650

The switch button on the control panel should be tapped and turned to prevent damage to the switch The use of the smart meter counter should be fully familiar with the manual pay attention to the position of the automatic and manual switches and set the automatic opening length In the future the meter counter will...

Practical metal iron slitting machine

• Model No.: FT-650

Hydraulic discharge rack operation method and refueling maintenance method First take out the raw materials according to the task list turn the raw materials in the direction of the opening toward the cutter shaft turn on the power of the hydraulic feeder and retract the tension arm to the minimum position Keep...

Practical metal stainless steel slitting machine

• Model No.: FT-650

Accessories Brand 1 Motor Shanghai ABB variable frequency motor Split cutting 11kw 1 seamless winding 15kw 1 unwinding 4kw 1 scrap 1 5 1 2 Reducer Jiangsu Guomao ZLY series 3 Frequency converter Mitsubishi frequency converter A840 series 15kw 1 unit 11KW 1 unit 5 5KW 1 unit 4 Contactor Mitsubishi series 5 Relay...

Excellent quality aluminum metal slitting machine

• Model No.: FT-450

300 seamless hydraulic winder 1 set 1 Function This machine is used to rewind the strip after slitting into coils 2 Main technical parameters 300mm seamless hydraulic expansion and contraction reel is 600mm long reduced 280mm winder bearing capacity 3 0T maximum rewinding outer diameter 1200 Power AC 15KW motor drive...

Excellent quality iron slitting machine

• Model No.: FT-650

Scrap coiler 1 Scrap coiler 1 set Installed on the discharge side of the slitting machine the cut edge wire waste is wound on the expansion wire frame through the automatic arranging line which is convenient for recycling and stacking saving space and economical and practical 2 The feeder frame is welded by profile...

Customized version of metal iron slitting machine

• Model No.: FT-650

Slitting host 1 set It is composed of feeding guide device slitting machine bakelite rack discharging roller and rotating low voltage control console 1 Guiding device 1 set The side guide position adopts the steel plate flat push and thread fine tuning type which is used to guide the strip feeding direction and adjust...

Customized version of aluminum slitting machine

• Model No.: FT-650

Uncoiler 1 set Function This machine is used to carry the coil material to rotate so that the coil material is slowly drawn out into the next process The main technical parameters The expansion and contraction range of the reel is 280mm 320mm the length of the reel 450mm the load bearing capacity of the decoiler 3T...

Customized version of stainless steel slitting machine

• Model No.: FT-650

Equipment composition and structure Equipment composition 1 Hydraulic electric coil feeder 1 set 2 Slitting host 1 group 3 1 set of scrap coiler 4 300 seamless hydraulic winder 1 set 5 1 power distribution box 6 1 1 5kw hydraulic oil station 7 600 length x600 width x700 height hydraulic loading trolley 1 group 8 600 L...

Customized version of copper cutting machine

• Model No.: FT-650

3 Other technical parameters of the equipment 1 Equipment working line speed 0 120m min speed adjustable 2 Equipment working power AC380V 50HZ three phase five wire power supply 3 Power of each drive motor of the equipment Loading trolley Ordinary motor AC 0 75KW Uncoiler inverter motor AC 4KW Slitting machine...