Communicate with Supplier? Supplier
Mr Liang Mr. Mr Liang
What can I do for you?
Contact Supplier

Dongguan Liaobu Jingye Precision Machinery Factory

Quality Aluminum Metal Cutting Machinery - manufacturer, factory, supplier from China

(Total 24 Products for Quality Aluminum Metal Cutting Machinery)

  • Excellent quality aluminum metal slitting machine

    Excellent quality aluminum metal slitting machine

    • Model No.: FT-450

    300 seamless hydraulic winder 1 set 1 Function This machine is used to rewind the strip after slitting into coils 2 Main technical parameters 300mm seamless hydraulic expansion and contraction reel is 600mm long reduced 280mm winder bearing capacity 3 0T maximum rewinding outer diameter 1200 Power AC 15KW motor drive...

    Contact Now

  • Stable metal splitting machine

    Stable metal splitting machine

    • Model No.: FT-650

    Our factory specializes in the development and production of various precision metal copper aluminum stainless steel slitting machines Jingye Precision Machinery Factory is a company specializing in manufacturing material cutting and slitting machinery and its auxiliary machinery and equipment It has more than ten...

    Contact Now

  • Precision metal giant roll slitting machine

    Precision metal giant roll slitting machine

    • Model No.: FT-450

    Dongguan Liaobu Jingye Precision Machinery Factory is a company specializing in manufacturing material cutting and slitting machinery and its auxiliary machinery and equipment It has more than ten years of experience in the production of cutting scissors spacers and cutting and slitting machinery Engineer guarantee...

    Contact Now

  • precision metal slitting machine process

    precision metal slitting machine process

    • Model No.: FT-650

    To descend turn to the left to ascend the main fixed arch hoisting position is filled with 30 lubricating oil once every six months and w40 lubricating oil is sprayed on the outer bearing position of the main shaft every day to moisten it The movable arch is guided by ball guide bearings Pay attention to keep it clean...

    Contact Now

  • precision metal slitting machine near me

    precision metal slitting machine near me

    • Model No.: FT-650

    Change the gear oil after 500 hours of initial use of the gearbox and every 2000 hours thereafter The gearbox is behind the main shaft The main machine part is mainly used to cut raw materials into products by upper and lower knives The sub shear main machine is driven by an 11kw motor The main shaft is connected to...

    Contact Now

  • precision metal slitting machine limited

    precision metal slitting machine limited

    • Model No.: FT-450

    The main shaft is made of steel material after secondary heat treatment It is made of precision grinding The main shaft bearings are imported The synchronous elevator is made of self made material and is nitridated It is durable and the level of the guide platform is parallel to the host to ensure accuracy The...

    Contact Now

  • precision metal slitting machine guns

    precision metal slitting machine guns

    • Model No.: FT-450

    The main machine part is mainly used to cut raw materials into products by upper and lower knives The sub shear main machine is driven by an 11kw motor The main shaft is connected to the main shaft by a gearbox through a coupling The main body is welded by 10 cm steel plates The main shaft is made of steel material...

    Contact Now

  • FT-650precision metal slitting machine blades

    FT-650precision metal slitting machine blades

    • Model No.: FT-650

    The main machine part is mainly used to cut raw materials into products by upper and lower knives The sub shear main machine is driven by an 11kw motor The main shaft is connected to the main shaft by a gearbox through a coupling The main body is welded by 10 cm steel plates The main shaft is made of steel material...

    Contact Now

  • FT-650metal slitting machiney in india

    FT-650metal slitting machiney in india

    • Model No.: FT-650

    The main machine part is mainly used to cut raw materials into products by upper and lower knives The sub shear main machine is driven by an 11kw motor The main shaft is connected to the main shaft by a gearbox through a coupling The main body is welded by 10 cm steel plates The main shaft is made of steel material...

    Contact Now

  • metal slitting machiney in dongguan

    metal slitting machiney in dongguan

    • Model No.: FT-650

    The main machine part is mainly used to cut raw materials into products by upper and lower knives The sub shear main machine is driven by an 11kw motor The main shaft is connected to the main shaft by a gearbox through a coupling The main body is welded by 10 cm steel plates The main shaft is made of steel material...

    Contact Now

  • FT-650metal slitting machiney suppliers

    FT-650metal slitting machiney suppliers

    • Model No.: FT-650

    The main machine part is mainly used to cut raw materials into products by upper and lower knives The sub shear main machine is driven by an 11kw motor The main shaft is connected to the main shaft by a gearbox through a coupling The main body is welded by 10 cm steel plates The main shaft is made of steel material...

    Contact Now

  • FT-650Production Metal slitting machinery and equipment

    FT-650Production Metal slitting machinery and equipment

    • Model No.: FT-650

    The platform is lifted and lowered by nut rotation to raise and lower and rotate to the right To descend turn to the left to ascend the main fixed arch hoisting position is filled with 30 lubricating oil once every six months and w40 lubricating oil is sprayed on the outer bearing position of the main shaft every day...

    Contact Now

  • FT-650 slitting and slitting machinery and equipment

    FT-650 slitting and slitting machinery and equipment

    • Model No.: FT-650

    FT 650 slitting and slitting machinery and equipment is made of precision grinding The main shaft bearings are imported The synchronous elevator is made of self made material and is nitridated It is durable and the level of the guide platform is parallel to the host to ensure accuracy The main machine part is mainly...

    Contact Now

  • FT-650Manufacturers supply aluminum slitting machine

    FT-650Manufacturers supply aluminum slitting machine

    • Model No.: FT-650

    The main machine part is mainly used to cut raw materials into products by upper and lower knives The sub shear main machine is driven by an 11kw motor The main shaft is connected to the main shaft by a gearbox through a coupling The main body is welded by 10 cm steel plates The main shaft is made of steel material...

    Contact Now

  • FT-650Metal material slitting machine

    FT-650Metal material slitting machine

    • Model No.: FT-450

    The main machine part is mainly used to cut raw materials into products by upper and lower knives The sub shear main machine is driven by an 11kw motor The main shaft is connected to the main shaft by a gearbox through a coupling The main body is welded by 10 cm steel plates The main shaft is made of steel material...

    Contact Now

  • Rugged and practical metal cutting equipment

    Rugged and practical metal cutting equipment

    • Model No.: FT-650

    The operation of the rewinding machine pay attention to the end face reference of the rewinding shaft or the expansion and contraction shaft to be consistent with the guide shaft of the feeding separator The expansion and contraction of the expansion and contraction shaft should be in place It is forbidden to press...

    Contact Now

  • Rugged and practical metal slitting equipment

    Rugged and practical metal slitting equipment

    • Model No.: FT-650

    The switch button on the control panel should be tapped and turned to prevent damage to the switch The use of the smart meter counter should be fully familiar with the manual pay attention to the position of the automatic and manual switches and set the automatic opening length In the future the meter counter will...

    Contact Now

  • Rugged and practical metal cutting machine

    Rugged and practical metal cutting machine

    • Model No.: FT-650

    The edge feeder is mainly responsible for collecting the edge material The edge material is wound into the edge feeder by the guide through the left and right guide screws It is mainly driven by a 1 5kw motor The speed is synchronized with the host The tension is controlled by the control panel Pay attention to the...

    Contact Now

  • Rugged and practical metal slitting machine

    Rugged and practical metal slitting machine

    • Model No.: FT-650

    The main machine part is mainly used to cut raw materials into products by upper and lower knives The sub shear main machine is driven by an 11kw motor The main shaft is connected to the main shaft by a gearbox through a coupling The main body is welded by 10 cm steel plates The main shaft is made of steel material...

    Contact Now

  • Practical metal iron slitting machine

    Practical metal iron slitting machine

    • Model No.: FT-650

    Hydraulic discharge rack operation method and refueling maintenance method First take out the raw materials according to the task list turn the raw materials in the direction of the opening toward the cutter shaft turn on the power of the hydraulic feeder and retract the tension arm to the minimum position Keep...

    Contact Now

  • precision metal slitting machiney co. ltd

    precision metal slitting machiney co. ltd

    • Model No.: FT-450

    The main machine part is mainly used to cut raw materials into products by upper and lower knives The sub shear main machine is driven by an 11kw motor The main shaft is connected to the main shaft by a gearbox through a coupling The main body is welded by 10 cm steel plates The main shaft is made of steel material...

    Contact Now

  • precision metal slitting machine reviews

    precision metal slitting machine reviews

    • Model No.: FT-450

    Change the gear oil after 500 hours of initial use of the gearbox and every 2000 hours thereafter The gearbox is behind the main shaft

    Contact Now

  • precision metal slitting machine inc

    precision metal slitting machine inc

    • Model No.: FT-650

    The main machine part is mainly used to cut raw materials into products by upper and lower knives The sub shear main machine is driven by an 11kw motor The main shaft is connected to the main shaft by a gearbox through a coupling The main body is welded by 10 cm steel plates The main shaft is made of steel material...

    Contact Now

  • FT-650metal slitting machine for sale

    FT-650metal slitting machine for sale

    • Model No.: FT-650

    FT 650metal slitting machine is mainly used to cut raw materials into products by upper and lower knives The sub shear main machine is driven by an 11kw motor The main shaft is connected to the main shaft by a gearbox through a coupling The main body is welded by 10 cm steel plates The main shaft is made of steel...

    Contact Now

Review

Mrs.sona

Feb 25, 2021 5

The Quality Aluminum Metal Cutting Machinery is very nice. I would like to purchase it and the smart thing next time.
Michael Kurzberg

Feb 21, 2021 5

Very happy with the Quality Aluminum Metal Cutting Machinery . Great value.
Hany Seddik

Feb 17, 2021 5

What a wonerful Quality Aluminum Metal Cutting Machinery ! Nice!
  • Video
  • Excellent quality aluminum metal slitting machine
  • Stable metal splitting machine
  • Precision metal giant roll slitting machine
  • Rugged and practical metal cutting equipment
  • Rugged and practical metal slitting equipment
  • Rugged and practical metal cutting machine
  • Rugged and practical metal slitting machine
  • Practical metal iron slitting machine
"Control the standard by the details, show the power by quality". Our organization has strived to establish a highly efficient and stable employees team and explored an effective high-quality command method for Quality Aluminum Metal Cutting Machinery , Quality Aluminum Metal Slitting Machinery , Quality Aluminum Metal Slitting Machine , We wholeheartedly welcome customers all around the world appear to visit our manufacturing facility and have a win-win cooperation with us!

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Send Inquiry

Mr Liang

Mr. Mr Liang

Tel:+86-0769-88903828

Fax:86-0769-88903903

Mobile Phone:+8613929239351

Email:jjwdd2005@163.com

Address:No. 9-11, Beiyonghe Second Street, Xialing, Liaobu Town, Dongguan City, Dongguan, Guangdong

Mobile Site

Home

Phone

About Us

Inquiry