Communicate with Supplier? Supplier
Mr Liang Mr. Mr Liang
What can I do for you?
Contact Supplier

Dongguan Liaobu Jingye Precision Machinery Factory

Production Metal Slitting Machinery And Equipment - manufacturer, factory, supplier from China

(Total 24 Products for Production Metal Slitting Machinery And Equipment)

  • FT-650Production Metal slitting machinery and equipment

    FT-650Production Metal slitting machinery and equipment

    • Model No.: FT-650

    The platform is lifted and lowered by nut rotation to raise and lower and rotate to the right To descend turn to the left to ascend the main fixed arch hoisting position is filled with 30 lubricating oil once every six months and w40 lubricating oil is sprayed on the outer bearing position of the main shaft every day...

    Contact Now

  • Stable metal splitting machine

    Stable metal splitting machine

    • Model No.: FT-650

    Our factory specializes in the development and production of various precision metal copper aluminum stainless steel slitting machines Jingye Precision Machinery Factory is a company specializing in manufacturing material cutting and slitting machinery and its auxiliary machinery and equipment It has more than ten...

    Contact Now

  • Precision metal giant roll slitting machine

    Precision metal giant roll slitting machine

    • Model No.: FT-450

    Dongguan Liaobu Jingye Precision Machinery Factory is a company specializing in manufacturing material cutting and slitting machinery and its auxiliary machinery and equipment It has more than ten years of experience in the production of cutting scissors spacers and cutting and slitting machinery Engineer guarantee...

    Contact Now

  • precision metal slitting machine process

    precision metal slitting machine process

    • Model No.: FT-650

    To descend turn to the left to ascend the main fixed arch hoisting position is filled with 30 lubricating oil once every six months and w40 lubricating oil is sprayed on the outer bearing position of the main shaft every day to moisten it The movable arch is guided by ball guide bearings Pay attention to keep it clean...

    Contact Now

  • precision metal slitting machine near me

    precision metal slitting machine near me

    • Model No.: FT-650

    Change the gear oil after 500 hours of initial use of the gearbox and every 2000 hours thereafter The gearbox is behind the main shaft The main machine part is mainly used to cut raw materials into products by upper and lower knives The sub shear main machine is driven by an 11kw motor The main shaft is connected to...

    Contact Now

  • precision metal slitting machine limited

    precision metal slitting machine limited

    • Model No.: FT-450

    The main shaft is made of steel material after secondary heat treatment It is made of precision grinding The main shaft bearings are imported The synchronous elevator is made of self made material and is nitridated It is durable and the level of the guide platform is parallel to the host to ensure accuracy The...

    Contact Now

  • precision metal slitting machine guns

    precision metal slitting machine guns

    • Model No.: FT-450

    The main machine part is mainly used to cut raw materials into products by upper and lower knives The sub shear main machine is driven by an 11kw motor The main shaft is connected to the main shaft by a gearbox through a coupling The main body is welded by 10 cm steel plates The main shaft is made of steel material...

    Contact Now

  • FT-650precision metal slitting machine blades

    FT-650precision metal slitting machine blades

    • Model No.: FT-650

    The main machine part is mainly used to cut raw materials into products by upper and lower knives The sub shear main machine is driven by an 11kw motor The main shaft is connected to the main shaft by a gearbox through a coupling The main body is welded by 10 cm steel plates The main shaft is made of steel material...

    Contact Now

  • FT-650metal slitting machiney in india

    FT-650metal slitting machiney in india

    • Model No.: FT-650

    The main machine part is mainly used to cut raw materials into products by upper and lower knives The sub shear main machine is driven by an 11kw motor The main shaft is connected to the main shaft by a gearbox through a coupling The main body is welded by 10 cm steel plates The main shaft is made of steel material...

    Contact Now

  • metal slitting machiney in dongguan

    metal slitting machiney in dongguan

    • Model No.: FT-650

    The main machine part is mainly used to cut raw materials into products by upper and lower knives The sub shear main machine is driven by an 11kw motor The main shaft is connected to the main shaft by a gearbox through a coupling The main body is welded by 10 cm steel plates The main shaft is made of steel material...

    Contact Now

  • FT-650metal slitting machiney suppliers

    FT-650metal slitting machiney suppliers

    • Model No.: FT-650

    The main machine part is mainly used to cut raw materials into products by upper and lower knives The sub shear main machine is driven by an 11kw motor The main shaft is connected to the main shaft by a gearbox through a coupling The main body is welded by 10 cm steel plates The main shaft is made of steel material...

    Contact Now

  • FT-650 slitting and slitting machinery and equipment

    FT-650 slitting and slitting machinery and equipment

    • Model No.: FT-650

    FT 650 slitting and slitting machinery and equipment is made of precision grinding The main shaft bearings are imported The synchronous elevator is made of self made material and is nitridated It is durable and the level of the guide platform is parallel to the host to ensure accuracy The main machine part is mainly...

    Contact Now

  • FT-650Manufacturers supply aluminum slitting machine

    FT-650Manufacturers supply aluminum slitting machine

    • Model No.: FT-650

    The main machine part is mainly used to cut raw materials into products by upper and lower knives The sub shear main machine is driven by an 11kw motor The main shaft is connected to the main shaft by a gearbox through a coupling The main body is welded by 10 cm steel plates The main shaft is made of steel material...

    Contact Now

  • FT-650Metal material slitting machine

    FT-650Metal material slitting machine

    • Model No.: FT-450

    The main machine part is mainly used to cut raw materials into products by upper and lower knives The sub shear main machine is driven by an 11kw motor The main shaft is connected to the main shaft by a gearbox through a coupling The main body is welded by 10 cm steel plates The main shaft is made of steel material...

    Contact Now

  • Rugged and practical metal cutting equipment

    Rugged and practical metal cutting equipment

    • Model No.: FT-650

    The operation of the rewinding machine pay attention to the end face reference of the rewinding shaft or the expansion and contraction shaft to be consistent with the guide shaft of the feeding separator The expansion and contraction of the expansion and contraction shaft should be in place It is forbidden to press...

    Contact Now

  • Rugged and practical metal slitting equipment

    Rugged and practical metal slitting equipment

    • Model No.: FT-650

    The switch button on the control panel should be tapped and turned to prevent damage to the switch The use of the smart meter counter should be fully familiar with the manual pay attention to the position of the automatic and manual switches and set the automatic opening length In the future the meter counter will...

    Contact Now

  • Rugged and practical metal cutting machine

    Rugged and practical metal cutting machine

    • Model No.: FT-650

    The edge feeder is mainly responsible for collecting the edge material The edge material is wound into the edge feeder by the guide through the left and right guide screws It is mainly driven by a 1 5kw motor The speed is synchronized with the host The tension is controlled by the control panel Pay attention to the...

    Contact Now

  • Rugged and practical metal slitting machine

    Rugged and practical metal slitting machine

    • Model No.: FT-650

    The main machine part is mainly used to cut raw materials into products by upper and lower knives The sub shear main machine is driven by an 11kw motor The main shaft is connected to the main shaft by a gearbox through a coupling The main body is welded by 10 cm steel plates The main shaft is made of steel material...

    Contact Now

  • Practical metal iron slitting machine

    Practical metal iron slitting machine

    • Model No.: FT-650

    Hydraulic discharge rack operation method and refueling maintenance method First take out the raw materials according to the task list turn the raw materials in the direction of the opening toward the cutter shaft turn on the power of the hydraulic feeder and retract the tension arm to the minimum position Keep...

    Contact Now

  • precision metal slitting machiney co. ltd

    precision metal slitting machiney co. ltd

    • Model No.: FT-450

    The main machine part is mainly used to cut raw materials into products by upper and lower knives The sub shear main machine is driven by an 11kw motor The main shaft is connected to the main shaft by a gearbox through a coupling The main body is welded by 10 cm steel plates The main shaft is made of steel material...

    Contact Now

  • precision metal slitting machine reviews

    precision metal slitting machine reviews

    • Model No.: FT-450

    Change the gear oil after 500 hours of initial use of the gearbox and every 2000 hours thereafter The gearbox is behind the main shaft

    Contact Now

  • precision metal slitting machine inc

    precision metal slitting machine inc

    • Model No.: FT-650

    The main machine part is mainly used to cut raw materials into products by upper and lower knives The sub shear main machine is driven by an 11kw motor The main shaft is connected to the main shaft by a gearbox through a coupling The main body is welded by 10 cm steel plates The main shaft is made of steel material...

    Contact Now

  • Precision stainless steel slitting machine

    Precision stainless steel slitting machine

    • Model No.: FT-450

    Dongguan Liaobu Jingye Precision Machinery Factory is a company specializing in manufacturing material cutting and slitting machinery and its auxiliary machinery and equipment It has more than ten years of experience in the production of cutting scissors spacers and cutting and slitting machinery Engineer guarantee...

    Contact Now

  • FT-650metal slitting machine for sale

    FT-650metal slitting machine for sale

    • Model No.: FT-650

    FT 650metal slitting machine is mainly used to cut raw materials into products by upper and lower knives The sub shear main machine is driven by an 11kw motor The main shaft is connected to the main shaft by a gearbox through a coupling The main body is welded by 10 cm steel plates The main shaft is made of steel...

    Contact Now

Review

Mr.andi Lucaci

Feb 27, 2021 5

The Production Metal Slitting Machinery And Equipment has arrived for 3 months. Sometimes we contacted after-sale service for some questions, they also gave the response immediately. I really appreciated it.
Mr.amarjit

Feb 10, 2021 5

Perfect Production Metal Slitting Machinery And Equipment , I have been doing research in this market for a long time, Dongguan Liaobu Jingye Precision Machinery Factory has attracted me, both the product's quality and the service, are first-class. I LOVE THIS PRODUCT. I LOVE THIS BRAND.
Grace Johnson

Feb 02, 2021 4

Very excellent. I am very pleased with the Production Metal Slitting Machinery And Equipment . Very well done.
  • Video
  • Stable metal splitting machine
  • Precision metal giant roll slitting machine
  • Rugged and practical metal cutting equipment
  • Rugged and practical metal slitting equipment
  • Rugged and practical metal cutting machine
  • Rugged and practical metal slitting machine
  • Practical metal iron slitting machine
  • Precision stainless steel slitting machine
We take pleasure in an exceptionally excellent status between our buyers for Production Metal Slitting Machinery And Equipment , Production Metal Slitting Machinery and Equipment , Professional Slitting Machinery and Equipment , It is actually our great honor to satisfy your needs.We sincerely hope we can easily cooperate along with you inside the around potential.
The corporation keeps towards the procedure concept "scientific administration, top quality and effectiveness primacy, buyer supreme for Production Metal Slitting Machinery And Equipment , Production Metal Slitting Machinery and Equipment , Professional Slitting Machinery and Equipment , Should really any of those items be of curiosity for you you should allow us to know. We'll be satisfied to give you a quotation on receipt of one's thorough specs. We now have our personal experienced R&D enginners to meet any of one's requriements We appear forward to receiving your enquires soon'and hope to have the opportunity to work together with you in the future. Welcome to check out our company.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Send Inquiry

Mr Liang

Mr. Mr Liang

Tel:+86-0769-88903828

Fax:86-0769-88903903

Mobile Phone:+8613929239351

Email:jjwdd2005@163.com

Address:No. 9-11, Beiyonghe Second Street, Xialing, Liaobu Town, Dongguan City, Dongguan, Guangdong

Mobile Site

Home

Phone

About Us

Inquiry